By Jake Behr –
Review of: Malekko Scrutator
Reviewed by: Jake BehrRating:5On April 14, 2017Last modified:April 14, 2017
In order for your guitar to make sense to your computer, its signal has to be converted to a series of numbers that represent the crests and troughs of the waveform. These are called samples; the higher the sample rate, the more high-range frequencies can be accurately expressed. Those samples are then recorded as on/off memory bits that contain the volume information of the waveform. The more bits, the less compressed and more nuanced your signal will be. Bitcrushers take advantage of this music-computer relationship by taking your analog signal into it’s loving, digital arms and manipulating the sample rate and bit depth to create an increasingly crude compression/distortion effect.
If you’re confused, you’re not alone. It was only recently that I became sure I understood the bitcrusher, and I’m still not sure I’m not afraid of it. The bitcrusher sits somewhere between overdrive and Armageddon machine, yielding surreal warmth at its most conservative and absolute mangled mush at the extremes. Originating as a popular offering in the realm of plugin software, a glut of savvy pedal builders have thrown their hat in the bitcrusher ring, reproducing and building on the effect in amazing and unexpected ways.
One such builder is Malekko Heavy Industry, a company one could describe as “enigmatic.” Today we’re taking a look at Malekko’s Scrutator, the first in a series of (so far, three) new units designed with Malekko’s proprietary DSP platform. The word “Scrutator” is an old, almost never used word which means “one who examines,” an appropriate nomenclature for a pedal designed to reduce your signal to its basest attributes and lay bare the grating nature of the bits below.
- Six Knobs:
Pre Amp control for effect input gain/attenuation
Bit Rate reduction control from 16bit to 2bit
Sample Rate reduction control from approximately 48kHz to 300Hz
Q control for bandwidth and amplitude filter amount
Mix controls the wet/dry
Filter controls a filter sweep
- Expression Pedal Input
- Low-Pass or Band-Pass Filter
- Clip LED indicates input clipping
- True Bypass
- 9VDC powered
Sound & Performance:
Those of us with already overloaded pedalboards (myself especially) will rejoice hearing the news that the Scrutator is an MXR-sized baby compared to most pedals with this much meat. A few companies have packed their bitcrushers with really intense modulation parameters that transform your signal into angry, whirring will-o-whisps: the Scrutator is not one such pedal. The Scrutator is a much more straightforward piece of hardware, giving you a ‘crusher, a filter, and that’s it. The parameters manipulating the effects within, however, make the Scrutator one of the most musical bitcrushers on the market.
The lynchpin of the Scrutator is of course, the Sample knob, which serves as more an auditory gradient from clean to slightly overdriven to ringmod to broken fuzz to, eventually, a series of question marks and exclamation points. I found that the most useable (in terms of traditional) tones were found no further than 7 o’clock, and rolling past that point we entered into some pretty bloopy territory. Every reviewer who has ever reviewed a BitCrusher has already said something like this, but so help me, the video game nostalgia is palpable here. Stacked with an overdrive, the dirt that the Scrutator adds cannot be overstated. A laser-focused filter is amazing over overdrive on a bad day; add that bitcrusher into the mix, you’re in for some clippy, synthy insanity.
The Expression pedal input is a swiss-army knife for this effect; you can set it to any combination of the Filter, Q, Bit or Rate parameters, and also the directional sweep can be altered to sweep up or down when the expression pedal is brought to heel or toe. What’s great about this is that the knobs continue to serve a purpose after the expression has taken their duties. For example, I set the filter to sweep up when I brought my expression to toe, while simultaneously crushing the Sample Rate, but I didn’t like how bright the filter or how squashed the sample rate parameter made my signal when maxed out. To fix this, I simply dialed the Filter and the Rate knobs back ever so much and voilá! A much more usable and chewy filter tone, fully adaptable to your notes by use of the expression pedal.
I feel like I should also talk about the Mix and Preamp knobs, because despite being unaffected by the expression, they play an integral role in the Scrutator’s character. Through use of the Preamp, you can attenuate the volume of the bitcrusher; you might choose to set it at unity for rhythm bloops or boost it for lead bloops. Either way, whenever you clip the Scrutator, a tiny LED light under the Preamp knob will flicker to let you know: “Hey! That’s loud!” Clipping the Scrutator actually has a pleasing, compressed effect to my ear, making the loss more obvious the further the Bit knob is cranked. The Mix knob, on the other hand, will allow you to mix in any amount of crushed or not-crushed signal into the sum signal. You might not use it this way, but I set it at about 2 o’clock and cranked the preamp to be just above unity, then swelled in filtered digital space whales. Fun.
The Scrutator can also be set to be affected by either a low-pass or band-pass filter by deactivating while holding down the footswitch, unplugging, and then plugging back in the device. It is kind of annoying that one has to power down the Scrutator to change the filter setting when this could have just as easily been featured using a toggle switch, but with the sheer quantity of variables and no preset option I could see why this is a better design, from a live performance standpoint. The Scrutator is already a small target to hit, and unless you have very long and dextrous toes, having one more thing to look out for is a figurative pain in the neck. Or a literal pain in the feet if you’re a Steven Wilson type and play barefoot.
With its slight profile, clever design, and expression out The Malekko Heavy Industry Scrutator stands out to me as one of the best bitcrushers on the market today. It is a carefully considered piece of hardware, built for the initial confusion and lifelong delight of its master. It’s also a very specialized pedal, but the few things it does, it does with gusto, and considering some of its more popular competitors retail for up to 50% more, I’d be stunned if we didn’t see a ton more Scrutators on ‘boards around the world. It’s certainly not a sound for everyone, but guitarists who love mangling their sound bit by bit will love what this pedal can do.
That concludes our review of the Malekko Scrutator. Thanks for reading!
June 22, 2017 at 9:50 am
hi! there you are guys? I’m a bit worry about this great project
April 20, 2017 at 8:53 am
Hi again! Jake don’t be afraid of making new videos – I like your style of playing -just keep going!